Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Ghost Voltage and Variable Frequency Drives: Why Many Measurements on Drives Are WrongMeasuring Busbars and Cable Bundles When a Rigid Clamp Jaw No Longer FitsWhen the Shock Really Happened: How a 3-Axis Data Logger Provides Evidence of Transport Damage and VibrationMeasuring Speed Without Contact: How a Stroboscope Makes Rotating Parts Appear to Stand StillWhy an Infrared Thermometer with 50:1 Optics Still Measures the Right Spot at Five Metres‘ DistanceSeamless Documentation of Dew Point and Humidity: Why a Data Logger Shows More Than Any Spot CheckWhy Your Multimeter Shows 230 Volts Even Though the Line Was Switched Off Long AgoMeasuring Temperature and Proving It at the Same Time: Why the Photo Belongs with the ReadingNon-Destructive Coating Thickness Testing: What the Paint Layer Reveals About Coating Quality and Accident DamageA 5.8 mm camera shows what lies behind the casing, without taking the machine apartVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Ghost Voltage and Variable Frequency Drives: Why Many Measurements on Drives Are WrongMeasuring Busbars and Cable Bundles When a Rigid Clamp Jaw No Longer FitsWhen the Shock Really Happened: How a 3-Axis Data Logger Provides Evidence of Transport Damage and VibrationMeasuring Speed Without Contact: How a Stroboscope Makes Rotating Parts Appear to Stand StillWhy an Infrared Thermometer with 50:1 Optics Still Measures the Right Spot at Five Metres‘ DistanceSeamless Documentation of Dew Point and Humidity: Why a Data Logger Shows More Than Any Spot CheckWhy Your Multimeter Shows 230 Volts Even Though the Line Was Switched Off Long AgoMeasuring Temperature and Proving It at the Same Time: Why the Photo Belongs with the ReadingNon-Destructive Coating Thickness Testing: What the Paint Layer Reveals About Coating Quality and Accident DamageA 5.8 mm camera shows what lies behind the casing, without taking the machine apart

All other devices report a value; this one takes action

Published on August 27, 2026 at 12:06

A measuring instrument ends at a number. It shows what is, and leaves everything else to the person standing in front of it. A controller goes one step further: it compares the measured quantity with a setpoint and does something about it — without anyone standing by.

You can tell right away by looking at the device, because it has two displays, one above the other: the process value on top, the setpoint below. Its whole job is to bring the upper number into line with the lower one. Everything else is a question of how.

1/16 DIN Temperatur PID-Regler mit Relaisausgang und zwei LED-Anzeigen

What It’s All About

A PID temperature controller in 1/16 DIN format for panel mounting.

  • One relay output (version with 4-20 mA output also available)
  • Two four-digit LED displays for process value and setpoint
  • One-touch auto-tuning for quick commissioning
  • Fuzzy logic PID
  • Two latching alarm relays with eight alarm modes
  • Inputs for thermocouple and RTD
  • Membrane keypad and guided menus

What P, I and D Each Answer

P asks: how far off am I? The output is set in proportion to the deviation — large deviation, lots of heating power. A pure P controller has a built-in catch, however: if the deviation were zero, the output would be zero too and the heater would be off. It therefore always settles just next to the setpoint.

I asks: how long have I been off? The integral term adds up the deviation over time and keeps nudging the output until even the last remainder disappears. That is exactly why it exists — it eliminates the steady-state error that P alone cannot get rid of.

D asks: how fast am I approaching? The derivative term responds to the rate of change and reduces the power before the setpoint is reached. It is the brake against overshoot.

Three questions, three time directions: present, past, immediate future.

Why Auto-Tuning Is Not Just a Convenience Feature

The right values for P, I and D do not belong to the controller, but to the plant. The same controller on a small laboratory furnace and on a large drying oven needs completely different parameters, because mass, heating power and losses differ.

Auto-tuning therefore deliberately disturbs the process, observes how it responds, and calculates the parameters from that. This spares you the alternative — changing values by feel and waiting to see what happens, a method that, in experience, goes on until someone switches off the control and runs things by hand.

Two Details Worth Knowing

A relay output switches; it does not modulate. Power is metered through a duty cycle: the relay switches on and off within a cycle time, and the average produces the desired heating power. This works very well for slow processes — but it has a mechanical limit, because a relay has a finite number of switching cycles. For fast or continuously fine control, the version with a 4-20 mA output is available.

Latching alarms are intentional. An alarm that resets itself as soon as the value is back in range hides precisely the short events you set it up to catch. Latching forces someone to acknowledge it — and thus ensures that someone has seen it.

Three Typical Applications

  • Furnaces and drying ovens: temperature control in custom-built equipment or retrofits.
  • Test benches and experimental setups: a defined setpoint without writing your own control programming.
  • Repair and maintenance: replacement for a faulty controller in an existing system.

Why It Pays Off

Manually controlled processes are seldom wrong — they are inconsistent. Someone adjusts them when they happen to walk by, and the result varies with the attention of the day. In heat treatment, drying or curing, that very variation is the quality characteristic.

A controller turns this into a repeatable curve, and the alarms turn it into a documentable one. For the price of a better handheld instrument, an entire class of causes of rejects disappears — causes whose origin can otherwise never be identified with certainty.

Learn more about the 1/16 DIN PID temperature controller →

More news

All news