Published on 16 November 2026 at 01:03
A fan is running audibly unevenly, a pump is delivering less than expected, and the motor’s nameplate shows a speed that says nothing about what the machine is actually doing right now. Anyone who works in maintenance knows the situation: you need to know the speed, but a handheld tachometer can’t be applied because the shaft is covered, the spot is hot or a guard grille is in the way.
What the StroboTach Is
The digital StroboTach is a stroboscope with an integrated speed display. You aim the flash at the rotating object and match the flash rate, given in flashes per minute, to the movement. Once the two are in sync, the part appears to stand still. The speed can then be read directly from the four-digit LED display. A quartz-controlled time base and a microcomputer circuit ensure a stable frequency. A tripod thread allows a fixed setup when you want to have both hands free.
Which Problems It Solves
One device handles two tasks. First, mechanical contact is no longer needed: nothing has to be attached, nothing stuck on, and the machine does not have to be stopped. Second, in the apparent standstill you can see what would otherwise be a blur, such as a broken tooth, a loose blade or a belt fluttering. When setting up, a proven rule applies: start above the expected speed and lower the frequency until the image appears single and sharp for the first time. At half or double the frequency, a multiple image can otherwise appear, which is easily mistaken for the correct speed.
Three Typical Applications
Building services and plant engineering: For fans and pumps, comparing the actual speed with the setpoint shows whether a frequency converter is set correctly or whether a V-belt is slipping.
Workshop and gearbox construction: On running gears, you can assess the meshing without opening the housing. Where there is a sight glass or an inspection opening, a look under stroboscopic light is enough.
Food production: On agitators, conveyor drives and filling machines, a contact measuring device is often undesirable in hygiene areas. Contactless measurement avoids contamination and interference with batches in progress.
Why the Purchase Pays Off
The benefit lies above all in time. A speed check that would otherwise require a shutdown, a rebuild or at least the removal of a cover takes just a few minutes during operation with the StroboTach. Deviations are detected early, before a bearing fails or a process runs out of tolerance. Every unplanned stoppage avoided is usually worth more than the device itself.
A note on safety: the standstill effect is purely optical. The machine keeps rotating, so distances and safety regulations apply unchanged.