Published on November 13, 2026 at 09:40
The paint starts to peel after a few weeks, the packaging gets moldy in storage, or a component shows condensation even though the hall temperature was within the target range. Afterwards, there is usually no proof of what the humidity and surface temperature actually were at that moment. A single reading from the morning is of little help then.
What the device measures
The hygro-thermometer/data logger records relative humidity and temperature via the supplied probe and uses them to calculate the dew point and wet bulb temperature. It also has an input for type K and J thermocouples. This also allows you to record surface and process temperatures in the higher range, which cannot be measured with a humidity sensor.
Recording instead of writing it down
The readings are written to an SD card at an adjustable sampling rate, in Excel format. The file can be opened directly on a PC, analyzed and transferred into a test report. Up to 20 million readings fit on a 2 GB card, so recording over days or weeks is not a storage problem. For quick checks, there is also a manual memory for 99 values. The backlit display shows Min, Max and Data Hold, and a PC interface is built in as well.
Where it is used
Painting and coating: Before application, the surface should be well above the dew point, as a rule of thumb about 3 K. If you record the dew point and the component temperature simultaneously via the thermocouple, you can document the clearance for coating.
Food production and storage: Ripening chambers, drying rooms and packaging areas have defined climate windows. A record over several days shows whether the humidity rises at night when the ventilation is switched off, or whether opening doors causes the values to swing.
Electronics manufacturing and maintenance: Air that is too dry promotes electrostatic discharge, while air that is too humid causes condensation on assemblies and control cabinets. A logger in the control cabinet or at the workstation provides data when failures occur sporadically.
Why it pays off
The cost of a climate problem rarely comes from the measuring instrument, but from scrap, rework, complaints and the search for the cause. A data record shortens this search considerably, because deviations can be assigned to a specific point in time. In addition, manual reading and entering values into lists is no longer necessary. This saves working time and eliminates transcription errors. If you need to demonstrate climate conditions to customers or auditors, you have the documentation ready as a file.
The delivery includes 6 AA batteries, an SD card, a carrying case and the humidity/temperature probe. The device is therefore ready for immediate use.