Published on October 15, 2026 at 03:48
A bearing is running hot, but nobody knows exactly how hot. The housing can only be seen through a gap behind a protective cover, and getting closer is not an option. With a basic infrared thermometer, you end up measuring from two meters away and capture not only the bearing but also the wall, the bracket and the ambient air. The reading is then wrong, and you often only notice once the damage is done.
What the device is
The Dual Laser Infrared Thermometer 53-42570 is a handheld instrument for non-contact surface measurement from -50 to 2200 °C. Its optics have a ratio of 50:1. From a distance of 50 cm, it therefore captures a spot of about 1 cm, and from 5 m, about 10 cm. Two laser points indicate the ideal measuring distance: they converge at a spot size of about one inch. The device also has a Type K input up to 1370 °C for contact measurements with a probe.
What problems it solves
Measurement uncertainty in infrared measurement mostly comes from two sources: a spot size that is too large and an incorrect emissivity. The 50:1 optics and the laser aiming aid address the first issue. The adjustable emissivity helps with the second, because matt paint, bare steel and plastic radiate very differently. With a response time of 100 ms, you can also track moving hotspots. MAX, MIN, AVG and DIF show the peak value, lowest value, average and spread, so you don’t have to write anything down as you go.
When and why to use it
Whenever touching is dangerous, impractical or too slow: with rotating parts, live equipment, hot processes or high-mounted components. Adjustable limits with an audible alarm report deviations while you keep working. Via USB, measurement series can be transferred to a PC with the supplied software and documented.
Three practical applications
Workshop and industry: In heat treatment, foundries or furnace construction, surfaces can be checked at high temperatures without having to enter the radiation zone. With bearings, gearboxes and motors, you can detect heating before it leads to failure.
Electrical: In control cabinets and at distribution boards, terminals, busbars and fuses often reveal loose connections first through heat. From a safe distance, the measurement provides a comparison between phases, and the DIF function makes the difference immediately visible.
Food production: Conveyor belts, cooling lines, ovens and packaging systems can be checked without contact, without contaminating the product or the surface. With shiny stainless steel, you should deliberately adjust the emissivity or cross-check with a probe.
Why it pays off
An unplanned shutdown usually costs more than the measuring instrument. A device that shows deviations early and reproducibly shortens troubleshooting, saves inspection rounds that require shutdowns and delivers reliable data for maintenance records. A single device for infrared and contact measurement also replaces two separate instruments.
If you need to record temperatures at a distance with traceable accuracy, you will find a tool here that stays in service for years.