Published on 14 October 2026 at 06:25
A pipe looks intact from the outside and the paint is holding, yet the wall has been getting thinner on the inside for years. Anyone working in maintenance knows the problem: the surface says little about the remaining wall thickness, and a component in operation cannot simply be cut open. This is exactly where ultrasonic thickness measurement comes in.
What the device is
The digital ultrasonic thickness gauge with data logger is a compact handheld device for non-destructive thickness measurement. It sends a pulse into the material via a transducer and determines the wall thickness from the transit time of the echo. With the supplied 5 MHz probe, it measures steel from 1 mm to 510 mm. An optional 10 MHz probe reaches thin walls from 0.5 mm.
Which problems it solves
Access is only needed from one side. Tanks, pipelines or vessel walls can therefore be inspected from the outside. The colour display uses red, yellow and green indicators to show immediately whether a reading is within the tolerance range. In the event of an alarm, the device also vibrates, which helps in noisy environments.
The live waveform (A-scan) shows whether the reading is based on a clean echo. The B-scan displays a cross-section of the test piece, making wall thickness profiles visible. The echo-echo option reduces errors caused by coatings, because the paint is not measured as part of the wall thickness.
When and why to use it
Typical uses are recurring inspections: during routine inspections, after repairs, for incoming goods inspection, or when the remaining service life of a component has to be assessed. The internal data logger stores up to 100,000 values and exports them to Excel. The file function allows measurement series to be compared, so the device works like a real-time corrosion monitor. The minimum value function captures the thinnest spot when scanning across a surface.
Three practical examples
Plant maintenance: Pipelines and vessels are inspected regularly at defined measuring points. The values go into the logger, and the trend shows how quickly the wall is thinning. For hot pipelines, high-temperature transducers are available.
Steel construction and manufacturing: Welded vessels, castings or milled plates are checked for minimum wall thickness without damaging the part. One fewer rejected part already justifies a share of the purchase.
Coated surfaces: On painted or coated steel surfaces, the coating does not have to be removed. With the echo-echo option, only the steel is measured.
Economic benefits
The price is just under 4,900 euros. Against this stand the costs of unplanned downtime, leaks and components replaced as a precaution. If you know the remaining wall thickness, you replace a component only when necessary, neither too early nor too late. Documentation is another benefit: with the logger, Excel export and the supplied XPorter software, inspections can be documented for auditors or insurers. A protective holster, couplant, batteries, a hard carrying case and a USB cable are included in the delivery, so the device is ready for use right away.
Anyone who has so far estimated wall thicknesses or only checked them by spot sampling will find a tool here that makes inspection traceable and repeatable.