Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Paint Coating Too Thin or Too Thick: Why Coating Thickness Only Becomes a Problem After ApplicationDetecting Moisture in Wood and Walls Before the Damage Becomes VisibleWhy the Cold Chain Usually Breaks at Night, and Only a Data Logger Shows ItGhost Voltage and Variable Frequency Drives: Why Many Measurements on Drives Are WrongMeasuring Busbars and Cable Bundles When a Rigid Clamp Jaw No Longer FitsWhen the Shock Really Happened: How a 3-Axis Data Logger Provides Evidence of Transport Damage and VibrationMeasuring Speed Without Contact: How a Stroboscope Makes Rotating Parts Appear to Stand StillWhy an Infrared Thermometer with 50:1 Optics Still Measures the Right Spot at Five Metres‘ DistanceSeamless Documentation of Dew Point and Humidity: Why a Data Logger Shows More Than Any Spot CheckWhy Your Multimeter Shows 230 Volts Even Though the Line Was Switched Off Long AgoVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Paint Coating Too Thin or Too Thick: Why Coating Thickness Only Becomes a Problem After ApplicationDetecting Moisture in Wood and Walls Before the Damage Becomes VisibleWhy the Cold Chain Usually Breaks at Night, and Only a Data Logger Shows ItGhost Voltage and Variable Frequency Drives: Why Many Measurements on Drives Are WrongMeasuring Busbars and Cable Bundles When a Rigid Clamp Jaw No Longer FitsWhen the Shock Really Happened: How a 3-Axis Data Logger Provides Evidence of Transport Damage and VibrationMeasuring Speed Without Contact: How a Stroboscope Makes Rotating Parts Appear to Stand StillWhy an Infrared Thermometer with 50:1 Optics Still Measures the Right Spot at Five Metres‘ DistanceSeamless Documentation of Dew Point and Humidity: Why a Data Logger Shows More Than Any Spot CheckWhy Your Multimeter Shows 230 Volts Even Though the Line Was Switched Off Long Ago

Paint Coating Too Thin or Too Thick: Why Coating Thickness Only Becomes a Problem After Application

Published on 20 November 2026 at 08:11

A component comes out of the paint shop, looks flawless and is shipped. Half a year later, the customer reports signs of rust on the edges, or the coating flakes off in one spot. In both cases, the cause is often the same: the coating thickness was not right, and nobody measured it. You cannot judge it by eye.

Schichtdicken Tester mit Bluetooth®

What the coating thickness tester measures

The CG304 coating thickness tester determines the thickness of coatings on metal without damaging the surface. It works with two methods. On iron and steel, it uses magnetic induction; on non-ferrous metals such as aluminium, it uses eddy current measurement. The device detects the substrate on its own and selects the appropriate method. You therefore do not need to determine in advance which material is in front of you, which saves a lot of time with mixed batches and rules out mix-ups.

Which problems it solves

A coating that is too thin does not provide sufficient protection against corrosion. A coating that is too thick costs material, can alter fits and tends to crack or flake. Both can only be detected by measurement. The device stores 2500 measured values in 50 groups of 50 values each. This allows a series of measurements to be filed neatly per lot, component or coating. Via Bluetooth and the included software, the data is transferred to your documentation. With the zero calibration function and the included steel and aluminium substrates as well as standard foils, you can check the calibration directly on site.

Where it is used

In the paint shop, you check after application whether the paint manufacturer’s specification has been met, and you can limit rework to specific spots. In steel construction and metalworking, you check corrosion protection and coatings on profiles and sheets before the parts leave the shop floor. In incoming goods inspection, you spot-check delivered steel or aluminium parts. If the thickness deviates from the specification, you have a measured value in hand that you can refer to in discussions with the supplier.

Why the purchase pays off

The economic benefit arises in two places. First, material consumption falls when you no longer apply coatings too thick as a precaution, but instead work at the limit of the target value. Second, you avoid complaints and rework, which cost many times more than a single measurement. Then there is the proof: stored measurement series show that the coating was in order at the time of delivery. This is a tangible advantage in warranty matters and customer audits. Because the tester automatically distinguishes between ferrous and non-ferrous metals, one device is enough for both material groups, and training new employees stays brief.

Conclusion

Anyone responsible for coatings should know their thickness rather than estimate it. The coating thickness tester delivers the figures that inspection, process control and documentation require, without damaging the workpiece.

Learn more

More news

All news