Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Detecting Moisture in Wood and Walls Before the Damage Becomes VisibleWhy the Cold Chain Usually Breaks at Night, and Only a Data Logger Shows ItGhost Voltage and Variable Frequency Drives: Why Many Measurements on Drives Are WrongMeasuring Busbars and Cable Bundles When a Rigid Clamp Jaw No Longer FitsWhen the Shock Really Happened: How a 3-Axis Data Logger Provides Evidence of Transport Damage and VibrationMeasuring Speed Without Contact: How a Stroboscope Makes Rotating Parts Appear to Stand StillWhy an Infrared Thermometer with 50:1 Optics Still Measures the Right Spot at Five Metres‘ DistanceSeamless Documentation of Dew Point and Humidity: Why a Data Logger Shows More Than Any Spot CheckWhy Your Multimeter Shows 230 Volts Even Though the Line Was Switched Off Long AgoMeasuring Temperature and Proving It at the Same Time: Why the Photo Belongs with the ReadingVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Detecting Moisture in Wood and Walls Before the Damage Becomes VisibleWhy the Cold Chain Usually Breaks at Night, and Only a Data Logger Shows ItGhost Voltage and Variable Frequency Drives: Why Many Measurements on Drives Are WrongMeasuring Busbars and Cable Bundles When a Rigid Clamp Jaw No Longer FitsWhen the Shock Really Happened: How a 3-Axis Data Logger Provides Evidence of Transport Damage and VibrationMeasuring Speed Without Contact: How a Stroboscope Makes Rotating Parts Appear to Stand StillWhy an Infrared Thermometer with 50:1 Optics Still Measures the Right Spot at Five Metres‘ DistanceSeamless Documentation of Dew Point and Humidity: Why a Data Logger Shows More Than Any Spot CheckWhy Your Multimeter Shows 230 Volts Even Though the Line Was Switched Off Long AgoMeasuring Temperature and Proving It at the Same Time: Why the Photo Belongs with the Reading

Extech MO290 3-in-1 Pinless Moisture Meter + Psychrometer + IR Thermometer: Why Condensation on a Wall Can Only Be Diagnosed by Simultaneously Measuring Surface Temperature, Dew Point and Material Moisture

Published on July 14, 2026 at 4:26 PM

Diagnosing moisture problems on building surfaces (condensation, mold growth, thermal bridges) is a multi-parameter problem. A building technician who only measures moisture will often be unable to identify the cause — because „moisture on the wall“ can have many different causes:

  1. Leak or water damage: Liquid water penetrates from the outside or from neighboring rooms.
  2. Rising damp: Capillary water from the foundation migrates upward.
  3. Condensation moisture: Humidity in the air condenses on cold surfaces (typically thermal bridges).
  4. Construction moisture: Moisture in new-build concrete that has not yet dried out.

The distinction is critical because the treatments are completely different. A leak requires repairing the source. Rising damp requires damp-proof course injection. Condensation moisture requires thermal insulation or ventilation. Construction moisture simply requires time.

The Extech MO290 combines the three measurements needed to diagnose CONDENSATION moisture in a single instrument.

The Three Measurements and How They Work Together

Measurement 1: Pinless Material Moisture

  • Capacitive sensor on the back of the instrument.
  • Measures water concentration in wood, plaster and concrete up to 19 mm below the surface.
  • Result in weight %.
  • Material selection (wood species, plaster, concrete) affects calibration.

Measurement 2: Humidity Psychrometer

  • Capacitive humidity sensor + NTC temperature sensor in the integrated probe.
  • Measures relative humidity (%RH) and air temperature.
  • Automatically calculates dew point (DP) from RH + temperature.
  • Also calculates grains per pound (GPP — absolute humidity) and vapor pressure.

Measurement 3: IR Surface Temperature

  • Non-contact infrared thermometer, 8:1 D:S ratio.
  • Fixed emissivity of 0.95 (typical for building materials: concrete, plaster, wood, paint).
  • Measures the wall’s surface temperature without contact.

The Trick: Differential Calculation

The instrument AUTOMATICALLY calculates the difference between the IR surface temperature and the dew point:

ΔT = T_surface − T_dew point

  • ΔT > 3 °C: No risk of condensation.
  • ΔT = 0 to 3 °C: Borderline range — condensation can occur during brief humidity spikes.
  • ΔT < 0 °C: Surface is below the dew point — ACTIVE condensation is taking place.

This ΔT measurement is the CRITICAL value for condensation diagnosis. Without the instrument, the technician would have to take three separate measurements with three different instruments and perform the calculations by hand.

Case Study: Mold Spot in a Bedroom Corner

A homeowner discovers mold in an exterior corner of a room. The MO290-based diagnostic workflow:

  1. Measure material moisture (pinless): Result: 18 % moisture in gypsum plaster (limit: 3 % for safe building materials).
  2. Measure humidity + temperature: Room temperature 22 °C, RH 65 %. Calculated dew point: 14.8 °C.
  3. Measure surface temperature (IR): Wall temperature at the mold spot: 12 °C.
  4. ΔT calculation: 12 − 14.8 = −2.8 °C. ACTIVE CONDENSATION.

Diagnosis: the wall corner is a thermal bridge (poor insulation in the corner). Warm, humid air condenses on the cold wall surface → moisture remains on the wall → mold growth. Cause: insufficient corner insulation.

Treatment: interior insulation at the corner OR (in new construction) exterior thermal insulation. This cannot be fixed with dehumidifying chemicals or ventilation alone — the physical thermal bridge must be resolved.

Why a Pinless Sensor for Walls

Pin-type moisture meters (inserting needle electrodes into the material) offer higher precision (±1-2 %), but:

  • They leave visible holes in painted walls.
  • They cannot penetrate tiles or hard coatings.
  • They are impractical for quick overview scans of an entire wall.

A pinless (capacitive) sensor leaves no marks and can scan an entire wall in a few seconds. A precision of ±3-5 % is sufficient for building diagnostics (the material is either clearly dry or clearly wet; the threshold lies at whole percentage points).

For definitive precision verification at an identified problem spot, an optional pin probe (MO290-P with 90 cm cable) can be connected.

Psychrometry in Building Diagnostics

Psychrometry is the science of air-water relationships. For building diagnostics, several parameters are relevant:

Relative humidity (%RH): How much water vapor the air contains relative to the maximum it can hold at the current temperature. Scale 0-100 %.

Dew point (DP): The temperature at which the air, at its current water content, would be saturated (100 % RH). This temperature is important because CONDENSATION occurs at exactly this temperature.

Grains per pound (GPP): Absolute humidity, measured in grains (0.0648 g) of water per pound of dry air. Practical because GPP is INDEPENDENT of temperature — unlike RH, which drops as temperature rises (even though the absolute water content stays the same).

Vapor pressure: Partial pressure of water vapor in mbar. A physically fundamental quantity.

IR Thermometer with 8:1 D:S and ε = 0.95

The IR thermometer portion of the MO290 is simpler than specialized IR instruments (see earlier articles on the FLIR TG54 24:1 with variable emissivity):

  • D:S ratio 8:1: At a distance of 50 cm, it measures a circle roughly 6 cm in diameter. Sufficient for walls (typically whole surfaces), not for small electronic components.
  • Fixed emissivity of 0.95: Suits MOST building materials (concrete, plaster, wood, matte paints). Not suitable for bare metal or shiny surfaces.

These simplifications are acceptable because the MO290 is a building diagnostics instrument, not an industrial IR thermometer.

Programmable Alarms

The MO290 has adjustable alarm thresholds for:

  • High material moisture (default: >18 %).
  • Low humidity (default: <30 %).
  • High humidity (default: >70 %).

Useful for continuous monitoring during longer measurements (e.g., tracking the drying process after water damage).

Applications

Water damage restoration: Diagnosis and progress monitoring. All three parameters together show whether drying is effective.

Mold investigation: The ΔT calculation identifies thermal bridges as the cause of condensation. Without this measurement, the cause of mold would often remain „inexplicable“.

Construction handover inspection: New buildings must be dry before the finishing work (flooring, painting, electrical) is installed. The MO290 verifies this.

Real estate purchase: Buyers commission technicians with an MO290 to check for hidden moisture problems.

Museum and cultural heritage conservation: Historic buildings require precise humidity monitoring to preserve murals, furniture and sculptures.

Woodworking: Furniture and parquet manufacturers measure wood moisture + ambient climate for optimal processing conditions.

Industrial climate control: Storage and production rooms with moisture-sensitive materials (electronics, pharmaceuticals, food).

HVAC system diagnostics: Condensation problems in ventilation ducts or on chilled-water pipes.

The Combined Measurement Method: Practical Procedure

Standardized condensation diagnosis routine:

  1. Switch on the instrument, allow 30 seconds to acclimate to the environment.
  2. Extend the air sensor so that the humidity + temperature of the room air is measured. Note the values.
  3. Aim the IR sensor at the suspect spot on the wall. Read the surface temperature.
  4. The instrument calculates ΔT automatically.
  5. Press the pinless back of the instrument against the wall. Read the material moisture.
  6. Diagnosis:
    • ΔT <0, high material moisture → active condensation.
    • ΔT >3, high material moisture → leak or rising damp (not condensation-related).
    • ΔT <0, low material moisture → incipient risk of condensation.
    • ΔT >3, low material moisture → no moisture problems.

Comparison with Alternatives

Standard pin moisture meters (material moisture only): 100-400 EUR. Shows only a one-dimensional picture of the problem and cannot diagnose causes.

Digital psychrometers (humidity + dew point only): 200-500 EUR. Shows the room climate but not material moisture or surface temperature.

IR thermometers (surface temperature only): 100-2000 EUR. Shows thermal bridges but not moisture relationships.

Thermal imaging camera + separate moisture meter: 3000+ EUR. Very powerful but complex; requires switching between devices.

Extech MO290 3-in-1: 685 EUR. Combines the three measurements critical for condensation diagnosis with automatic ΔT calculation.

Specifications

  • Moisture sensor (pinless): 0-99.9 % (calibratable for various wood species, plaster, concrete). Measurement depth up to 19 mm.
  • Humidity: 0-100 % RH, ±3 %.
  • Air temperature: -10 to +60 °C, ±0.5 °C.
  • Dew point calculation: automatic from RH + temperature.
  • IR thermometer: -35 to +365 °C, D:S 8:1, fixed ε 0.95.
  • Automatic IR−DP differential calculation.
  • Programmable alarms (moisture + humidity high/low).
  • Optional pin sensor MO290-P (with 90 cm cable).
  • Dual display with backlight.
  • Min/Max recording, Data Hold, Auto Power Off.
  • Complete with battery and carrying case.

What You Get for the Money

Extech MO290 3-in-1 pinless moisture meter + psychrometer + IR thermometer, capacitive moisture sensor with 19 mm measurement depth (material selection for wood/plaster/concrete), humidity sensor with automatic dew point calculation, non-contact IR thermometer 8:1 D:S with ε=0.95, automatic IR−DP differential calculation for direct condensation diagnosis, programmable alarms, dual display with backlight, Min/Max and Data Hold, complete with battery and carrying case. 685 EUR.

The standard tool for contractors, water damage restoration specialists, real estate inspectors, HVAC technicians and other applications in which the diagnosis of condensation moisture requires all three parameters. The higher price compared to a single pin moisture meter (100-200 EUR) is justified when root-cause diagnosis (not just symptom detection) is the goal — and that is the goal for any professional building diagnostic.

Read more: Extech MO290 3-in-1 in the shop →

More news

All news