Published on July 5, 2026 at 12:50 pm
Fresh outdoor air today contains about 420 ppm (parts per million) of carbon dioxide, the highest level since industrial measurements began. Indoor air in a well-ventilated office is around 600-800 ppm. In a poorly ventilated classroom, the concentration can climb to 1500-2500 ppm after one hour of lessons. That is not only unpleasant. Studies by TU Berlin and the Harvard T.H. Chan School of Public Health show that cognitive performance at 1400 ppm CO2 drops by up to 50% compared with the baseline at 550 ppm. Concentration, decision-making and response time all measurably deteriorate.
What the CO240 is
The CO240 indoor air quality meter is a portable instrument that measures three parameters simultaneously and shows them on a dual display:
- CO2 concentration (0-5000 ppm) — using an NDIR sensor (non-dispersive infrared sensor).
- Temperature — in °C or °F.
- Relative humidity — as %rH.
- Dew point or wet-bulb temperature — calculated from the measured values.
The device also features:
- An audible alarm when a user-defined CO2 limit is exceeded.
- Min/max value recall for analysis over time periods.
- USB data logger connection with included PC software for real-time recording.
- Automatic baseline calibration (ABC), which uses the lowest CO2 concentration measured over the past week as the reference for the sensor.
- Data hold, auto power-off (can be disabled), low-battery indicator.
- Tripod thread for fixed mounting.
Why an NDIR sensor and not electrochemical
CO2 sensors are based on two fundamental principles:
Electrochemical sensors: Inexpensive, but with a limited service life (typically 2-3 years). They lose calibration through chemical aging and are cross-sensitive to other gases. They are commonly used in consumer CO2 detectors.
NDIR (non-dispersive infrared): More precise, maintenance-free, with a service life of decades, and specific to CO2 thanks to its absorption wavelength of 4.3 μm. The standard in professional instruments.
The principle: CO2 molecules absorb infrared light at 4.3 μm. The sensor sends IR light through a small chamber and measures how much light reaches the detector. The more CO2 in the chamber, the less light arrives. The relationship is precise and drift-stable.
NDIR sensors retain their accuracy for 15-20 years under normal use. Electrochemical sensors must be replaced after 2-3 years. For professional applications, NDIR is the only sensible choice.
What CO2 values mean in context
At the concentrations found indoors, carbon dioxide itself is not directly harmful to health. However, the values are proxy indicators of fresh air supply:
- 400-450 ppm: Outdoor air, no occupancy.
- 600-800 ppm: Well-ventilated room, adequate fresh air.
- 800-1000 ppm: Limit value for new buildings according to DIN EN 16798-1. Cognitive performance not yet significantly impaired.
- 1000-1400 ppm: Insufficient ventilation. Concentration drops by 5-15%. Recommendation: open windows, increase ventilation.
- 1400-2000 ppm: Marked cognitive impairment; fatigue and headaches possible. Ventilation urgently required.
- >2000 ppm: Critical. Concentration and decision-making severely impaired.
Since the COVID-19 pandemic, CO2 measurement has taken on additional importance: high CO2 levels correlate with a high aerosol content in indoor air, which increases the likelihood of transmission of SARS-CoV-2 and other airborne pathogens.
Automatic baseline calibration (ABC) — how the device calibrates itself
Over the years, NDIR sensors can develop a slight zero-point drift. The ABC function compensates for this automatically:
- The device continuously stores the lowest CO2 concentration measured over the past week.
- This lowest value is assumed to correspond to the outdoor air level (~420 ppm).
- This assumption is used to recalibrate the sensor.
The ABC function only works correctly if the device is regularly exposed to fresh outdoor air (e.g., on weekends or overnight when rooms are unoccupied). For rooms that are permanently occupied (24/7 control centers), ABC must be disabled and the device calibrated manually.
USB data logger — continuous recording for analysis
The device can be connected to a PC via USB cable, and the included software then records CO2, temperature and humidity as a time series. Typical applications:
- Diagnosing ventilation problems: A 24-hour recording shows when the ventilation is not working.
- Validating ventilation systems: New HVAC systems are checked against target values.
- Occupational safety documentation: Proof that the Workplace Ordinance (Arbeitsstättenverordnung) is being complied with.
- Optimizing ventilation times: Data-based decisions on when windows should be opened.
Where the CO240 makes the difference
Schools and classrooms: KMK (Standing Conference of the Ministers of Education) recommendation 2020: CO2 below 1000 ppm during lessons. Without measurement, compliance cannot be documented.
Offices and coworking spaces: The Workplace Ordinance (ArbStättV) requires adequate ventilation. CO2 measurement is the simplest objective proof.
Conference rooms and event halls: In meetings with 20+ people, CO2 levels can rise to 2000 ppm within 30 minutes. Regular measurement shows when breaks for airing out are needed.
Restaurants and hotels: Since the pandemic, many guests expect visible evidence of good indoor air quality. A publicly visible CO2 meter builds trust.
Fitness studios and sports halls: During physical activity, people exhale 5-10x more CO2. Ventilation requirements are higher than in office spaces.
Hospitals and medical practices: Waiting areas and treatment rooms require documented ventilation control for infection prevention.
Kindergartens and daycare centers: Small children breathe in more air relative to their body weight and are more sensitive to poor air quality.
Home office and private use: For people who work from home and want to optimize their cognitive performance.
Agriculture (greenhouses): When optimizing photosynthesis, CO2 levels of 800-1500 ppm are productive. The device measures and documents them.
Wine cellars and food storage: Fermentation processes produce CO2, and dangerously high concentrations can build up in closed rooms.
What you get for your money
CO240 indoor air quality meter, measures CO2 (0-5000 ppm using a maintenance-free NDIR sensor), temperature, relative humidity and dew point/wet-bulb temperature simultaneously, audible alarm when limits are exceeded, min/max recall, data logger software and USB cable included, automatic baseline calibration, data hold, auto power-off (can be disabled), low-battery indicator, tripod thread, complete with six AAA batteries and a soft case.
432 euros is the investment for the instrument. This is one of the most cost-effective CO2 meters with an NDIR sensor on the market. For schools, medical practices and businesses that want to document and optimize ventilation problems, the purchase pays for itself within a few months through fewer sick days and optimized ventilation strategies. An additional tripod is available as an option.
Learn more: CO240 indoor air quality meter in the shop →